Neoheat 8 S+

Neoheat Standard Plus Heat Pump is intended for heating single-family houses and domestic water. It can be the primary or secondary heating system. The Standard Plus model heats in winter and cools in summer, and can also control a second heat source, i.e. solar collectors. It has an integrated water tank with a 200 litre capacity. The touchscreen control panel makes it easy to manage the temperature in the house. It can be connected to function with different heat supply systems, e.g. radiators, fan coils or underfloor heating. It is possible to connect exchangers and set different temperatures for them. There are several pump performance options available. The choice of pump size should depend on the demand for heating power.

Ask for the product

Basic equipment

  • Integrated electrical heater, 3 x 2 kW
  • Speed-regulated circulating pump with low sound levels of up to 6 dB
  • 8 litre expansion vessel
  • 2.5 bar safety valve
  • Flow measurement and control sensor
  • 3-way valve for DHW
  • Heat balance calorimeter
  • DHW output
  • Floor drying/heating program
  • Second heat source control
  • Touch control panel
  • Functions in an online environment
  • Temperature control depending on external conditions

Accessories

  • Czujnik temperatury jednostki wewnętrznej
  • Zawór 3-drogowy do mieszania dwóch źródeł ciepła
  • Zawór 3-drogowy strefowy do kolektorów słonecznych
  • Zdalny dostęp do serwisu
  • Możliwość zdalnego sterowania poprzez serwer

SeriesStandard Plus
TypeNeoheat 8 S+
+2°C / +35°C (EN 14511) Capacity*kW8
+2°C / +35°C (EN 14511) COP**3,5
Annual energy consumption DHWkWh880
Annual energy consumption Indirect temp.kWh5415
Annual energy consumption Low temp.kWh4415
Bivalent point Indirect temp.°C-7
Bivalent point Low temp.°C-7
Capacity Indirect temp.kW8
Capacity Low temp.kW8
Cooling capacitykW7,5
EERkW3,21
Efficiency of DHW heating%120
SCOP3,95
Seasonal energy efficiency (Eu 811, 813/2013) Class%A++
Seasonal energy efficiency (Eu 811, 813/2013) Indirect temp.%113
Seasonal energy efficiency (Eu 811, 813/2013) Low temp.%155

*100% pracy sprężarki

**Wielkość mierzona jest standardem ČSN 14511, 45% mocy sprężarki (pomiar zawiera tryb rozmarażania i całe zapotrzebowanie technologiczne pompy ciepła)

SeriesStandard Plus
TypeNeoheat 8 S+
Air flow ratem3/h3600
Amount of refrigerant in the unitkg2,1
CompressorDC Inwerter
Cooling circuit adjustmentelektroniczny zawór rozprężny
Cooling pipes [diameter - fluid]9,52
Cooling pipes [diameter - gas]mm15,88
Cooling pipes [length without recharging – Max.]m20
Cooling pipes [length – Min./Max.]m5/50
Cooling pipes [Max. level difference]m30
Current input Max.A17
Defrostingpoprzez gorący gaz z zaworem zwrotnym
EvaporatorAl-Cu pionowy
Fan motorDC - zmiennoobrotowy
Limit for relative humidity15-95%
Max. water heating temperature°C55
Min. water heating temperature°C15
Net dimensions (H x W x L)cm89 x 90 x 33
Operating temperature range°C-15 ~ 24
Power supply Ph/V/Hz1/230/50
RefrigerantR410A
Sound power leveldB(A)69
Weightkg68

*100% pracy sprężarki

**Wielkość mierzona jest standardem ČSN 14511, 45% mocy sprężarki (pomiar zawiera tryb rozmarażania i całe zapotrzebowanie technologiczne pompy ciepła)

SeriesStandard Plus
TypeNeoheat 8 S+
Capacity of electric heaters PowerkW6,0
Circulating pumpniskoenergetyczna wg. dyrektywy ERP
Condensing exchangerzbiornik ze stali nierdzewnej
Counter-current protectionA3 x 25
DHW tankl200
Dimensions (H x W x L)cm211 x 63 x 63
Heat circuit connectionG1, "gwint wewnętrzny
Max. pump lift heightm18
Net weightkg186
Nominal flow of heated waterl/h950
Overpressure protectionMPa0,25
Sound power leveldB(A)42

*100% pracy sprężarki

**Wielkość mierzona jest standardem ČSN 14511, 45% mocy sprężarki (pomiar zawiera tryb rozmarażania i całe zapotrzebowanie technologiczne pompy ciepła)